IDE interface Last modified: Monday, January 27, 2003
Abbreviation of either Intelligent Drive Electronics or Integrated Drive Electronics, depending on who you ask. An IDE interface is an interface for mass storage devices, in which the controller is integrated into the disk or CD-ROM drive. Although it really refers to a general technology, most people use the term to refer the ATA specification, which uses this technology. Refer to ATA for more information.
•E-mail this definition to a colleague• For internet.com pages about IDE interface . Also check out the following links! Hard Disk Interfaces and Configuration  Describes the different major interface standards currently used by hard disks (and other devices). Provides sections about the IDE/ATA and SCSI interfaces. This page is from "The PC Guide." Integrated Drive Electronics / AT Attachment (IDE/ATA) Interface  Describes IDE/ATA standards and feature sets, transfer modes and protocols, and configuration and cabling. This page is from "The PC Guide." Hard Disk BIOS and Capacity Factors Describes issues related to how the BIOS and operating system interact with the hard disk, and BIOS-related issues and problems. Includes a full look at the many capacity limitations inherent in using IDE/ATA interface drives, and other BIOS restrictions on hard disk capacity. This page is from "The PC Guide." IDE Device Setup / Autodetection Describes the BIOS settings that control the setup of IDE/ATA devices (particularly hard disk drives). This page is from "The PC Guide". Integrated Drive Electronics / AT Attachment Interface Describes IDE/ATA standards and features, transfer modes and protocols, and configuration and cabling. This page is from "The PC Guide."	Disk Drives Ports and Interfaces ATA EIDE hard disk drive HyperCard SCSI Serial ATA ST-506 interface Give Us Your Feedback Shopping IDE interface Products Compare Products,Prices and Stores Shop by Category: Hard Drives 2 Store Offers Memory Adapters 3 Model Matches